Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

This acts as a bypass capacitor for the LCD, but the LCD is a big component that draws a lot of power, so it needs a big capacitor.

Tools Needed

  • Soldering iron
  • Cutter

Parts Needed

  • 1 x 10μF electrolytic capacitor
     

Instructions

  1. Solder the 10μF capacitor into C1.

 

  • No labels

Unless otherwise noted, content on this site is licensed under the
Creative Commons Attribution-ShareAlike 4.0 International License.