Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

R35 and C11 form a noise filter for the output from the amplifier.

Tools Needed

  • Soldering iron
  • Cutter

Parts Needed

  • 1 x 100Ω resistor
  • 1 x 0.1μF capacitor

Instructions

  1. Solder the 100Ω resistor into R35.
  2. Solder the 0.1μF capacitor into C11.
    INSERT A PICTURE OF CAPACITOR BEING INSERTED INTO PLACE.
  • No labels

Unless otherwise noted, content on this site is licensed under the
Creative Commons Attribution-ShareAlike 4.0 International License.