ALCOHOL CAN CATCH FIRE!
Keep it away from sources of heat, including the solder iron. Failure to do so may result in fire, or worse!
- After cleaning, make sure to remove all alcohol from the board before continuing to solder.
MOLTEN SOLDER CAN SPLASH IN YOUR FACE!
- Wear safety goggles while working to make sure nothing gets in your eyes.
INSERT PICTURE OF FAILING TO COMPLY - Don't put your head too close to the board while soldering to avoid solder splash getting in your face.
INSERT PICTURE OF FAILING TO COMPLY
SOLDERING IRONS ARE HOT!
Soldering irons operate at CRAZY temperatures! The handle on the iron can get hot. That's okay, but DO NOT EVER TOUCH the rest of it. It is extremely hot and will burn a lot!
- Don't touch the hot part, YOU WILL GET BURNED.
INSERT PICTURE OF FAILING TO COMPLY - Always put the soldering iron back on it's stand and turn it off before getting up from your workstation.
INSERT PICTURE OF FAILING TO COMPLY - Do not play or roughhouse where a soldering iron is in use.
INSERT PICTURE OF FAILING TO COMPLY - Do not reach across an area where an iron is being used. Go around.
INSERT PICTURE OF FAILING TO COMPLY
SOLDER FUMES ARE NASTY!
- Always work in a well-ventilated place area, with the air conditioning on.
INSERT PICTURE OF FAILING TO COMPLY - If available, working outside is also an option.
INSERT PICTURE OF SOLDERING IN THE SUNSHINE - A small fan or air filter can help reduce solder fumes.
INSERT PICTURE OF FUME EXTRACTOR. - A respirator may also help.
ELECTRICITY CAN SHOCK YOU!
- Never leave power connected while soldering. This may result in electric shock.
WIRE TRIMMING CAN GO FLYING!
- Never leave power connected while soldering. This may result in electric shock.
