Versions Compared

Old Version 2

changes.mady.by.user Brett Weir

Saved on

compared with

New Version 3

changes.mady.by.user Brett Weir

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Now that everything is all good and assembled, let's put on the back pane so that no dirty fingers will be touching your LameStation.

Tools Needed

  • Phillips-head screwdriver

Parts Needed

  • 1 x Cover plate
  • 4 x Hex standoffs
  • 8 x Screws

Instructions

  • Peel the plastic off of the acrylic piece. Be careful not to put your grimy fingers on the inside of the glass, because it will stay there forever! Make sure you mount it cleanly and carefully.
  • Just like with the LCD, just screw on the standoffs on the back side.
  • Place the back piece down, being careful to orient it so that the logo is upright and the batteries are accessible.
     
  • Screw the back piece onto the standoffs, starting with opposite corners so that it's easier to position correctly.