You will now be installing NPN transistors to Q1, Q2, and the PNP transistor to Q3.
Before doing anything here, it's important to correctly identify which transistor is which. The NPN transistors will say "3904" on their package, while the PNP transistor will say "3906".
Do not confuse the transistors! If your solder the wrong one in place, your programming port will not work and you will not be able to use your LameStation for anything useful! |
Solder the transistors into place.
Make sure you installed the transistors in the correct position! You will not be able to use your LameStation at all if done incorrectly! |