...
INSERT IMAGE OF VOLTAGE LADDER
Tools Needed
- Soldering iron
- Cutter
Parts Needed
- 4 x 1kΩ resistors
- 2 x 3kΩ resistors
Instructions
- Find the resistor footprints for the voltage ladder on the board, next to the comparator socket.
- R17 and R22 are nestled in between the other resistors. Don't get them confused!
- Then install R1, R2, R19, and R20. These go right around R17 and R22.
- Bend the leads of all of these resistors and solder them at the same time.