Step 2: Low-Pass Filter

Owned by Brett Weir
Last updated: Oct 14, 2014
1 min read

R31, C9 form a low-pass filter.

Tools Needed

  • Soldering iron
  • Cutter

Parts Needed

  • 1 x 4.7kΩ resistor
  • 1 x 0.1μF capacitor

Instructions

  1. Solder the 4.7kΩ resistor into R31.
  2. Solder the 0.1μF capacitor into C9.
    INSERT PICTURE OF CAPACITOR BEING INSERTED INTO PLACE.

Unless otherwise noted, content on this site is licensed under the
Creative Commons Attribution-ShareAlike 4.0 International License.