Step 1: High-Pass Filter

Owned by Brett Weir
Last updated: Oct 14, 2014
1 min read

C8, R28 form a high-pass filter.

Tools Needed

  • Soldering iron
  • Cutter

Parts Needed

  • 1 x 10kΩ resistor
  • 1 x 0.1μF capacitor

Instructions

  1. Solder the 10kΩ resistor into R28.
  1. Solder the 0.1μF capacitor into C8.

Unless otherwise noted, content on this site is licensed under the
Creative Commons Attribution-ShareAlike 4.0 International License.