Section 4: Serial
Overview
Please help make this section awesome!
Schematic
Parts Needed
(Top row)
- 1 x 9-pin D-Sub connector
(Middle row from left to right)
- 1 x PNP transistor
- 2 x NPN transistor
- 1 x 4-pin socket
- 1 x 0.1μF capacitor
(Resistors)
- 1 x 1kΩ resistor
- 6 x 10kΩ resistor
Unless otherwise noted, content on this site is licensed under the
Creative Commons Attribution-ShareAlike 4.0 International License.